777 125 166 (Po-Pá: 8-17), 228 227 571 (Po:13-17,St+Pá:10-18) - Prosíme volat pouze v pracovní době !

Spodek tága Molinari KURO CMI-3

Kód: 101130
Značka: Molinari
26 990 Kč
Na dotaz

Spodní čás tága Molinari - bez špice.

molinari44

Detailní informace

Detailní popis produktu

Spodek tága Molinari KURO CMI-3

Molinari KURO CMI-3 (butt)

Pokročilá konstrukce Molinari 2.0
Délka: 745 mm
Intarzie Juma® s délkou až 260 mm
Patice Juma®
Závit Uni-Loc® nebo Radial -  zalitý v černém fenolu
Integrovaný dovažovací systém


Růžné designy na výběr. Požadované tágo a závit uveďte prosím v poznámce u objednávky.


TOTO JE POUZE ZADNÍ ČÁST TÁGA. OBJEDNEJTE SI SAMOSTATNĚ ŠPICI LANCIA NEBO JAKOUKOLIV JINOU S ODPOVÍDAJÍCÍM ZÁVITEM.

 

Molinari KURO CMI-3 (butt)

This cue is another example of our technical workmanship, however with more black accents in the design. Six extremely long inlayed points in Juma®, reaching up to 260 mm. Molinari 2.0 advanced body construction, manufactured with a very high accuracy, using our next-gen CNC – equipment. The construction guarantees absolute straightness, uninfluenced by heat or humidity, provides a rock-solid feedback and an 100% energy-transfer. The integrated weight – cartridge allows for tuning, exactly to the players personal preference.

  • Molinari 2.0 advanced body construction
  • Length: 745 mm
  • Juma® Ivory, Elforyn® and Ivory Grained inlays with a length up to 260 mm
  • Juma® Ivory butt cap
  • Joint – pin encased in Black Phenolic linen
  • Joint collar in Black Phenolic linen
  • Integrated weight Cartridge
  • Radial Joint or Uni-Loc®
 

Butt – collar

 
1The central part of the butt-collar consists of a single piece of linen-based Phenolic Resin which holds the Monolith® joint pin and ensures the lossless transmission of energy towards the shaft without initiating any unwanted vibrations. All structural parts are not only glued but also threaded for a tighter fit and durability.

Body

 
2A multi-layer design with carefully selected composite fibers is fused into a single part and was engineered with the focus on eliminating unwanted vibrations and maximized energy-transfer.

What you see is what you get!

Molinari refrains from using inferior techniques for the optical aspects of our products, like there are decals, “on-lays” or prints. Every design feature is a real inlay just as used in traditional high-end cue manufacturing. Molinari® is proud to be the first cue manufacturer having re-engineered the inlay technique into a workable solution for use in dense composite structures.

The spindles on our CNC-centers rev up to 65.000 rpm, we use end mills with a diameter of less than 0,004 “ controlled by an automated measuring system. The A-axis have a position – repeatability of better than 1/100 of a degree and the X-Y-Z axis’s have a positioning – accuracy better than 0,005 mm/meter.

The cavity within the shaft-body is filled with a low density foam as an additional damper to counteract unwanted vibrations.

Adjustable weight

 
4A weight-cartridge has been integrated in the back of the handle allowing for quick and effortless changes to the weight of your cue. The inside lining of the cartridge is especially designed to “hold” the weights in the correct position.
 

Buďte první, kdo napíše příspěvek k této položce.

Nevyplňujte toto pole:
Vytvořil Shoptet | Design Shoptetak.cz